Miter SawMiter saws are a great tool when precision is wanted when making cross cuts (90 degrees) as well as miter cuts.

However, shopping for a miter saw can be a bit overwhelming as there is a huge variety of saws available on the market.

You’ll need to think over your needs in a saw as well as read a few miters saw reviews in order to help choose which saw will really meet your needs best. Our guide will help you make the right decision.

Best Miter Saw Reviews

DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter Saw Review

For those people who don’t need a 12-inch blade for the larger cuts, you may consider checking out the DEWALT DW717. While it isn’t as fully featured as some of the other products in its line, it will still likely be able to handle most of the cuts that you are going to want to make.

Is there anything that makes the DW717 special?

So you must be asking – what is so special about this miter saw? There are a ton of options out there, so filtering through the noise to make a good choice can be tiresome. With this one, you are going to be loving bevel cuts. With this one, you can make cuts anywhere between 0 and 48 degrees, which is plenty for the majority of projects out there. It also saves you from having to flip your cut – and instead just flip the saw. This makes things much easier to get done.

If you don’t want something that needs some major adjustments when getting, you will be pleased here. Most people upon arrival are able to use the DW717 out of the box without adjustments. There are a few people who needed to make a few changes, but overall the sentiment is good in this area. It can take some time to dial it in if you want the blade a specific way – and this saves time.


  • Tall fencing and rails make bevel cuts easy.
  • Increase big job capacity with an increase in bevel cuts functionality
  • Laser system which allows you to see where you are going
  • A simple design that still contains all the bells and whistles


  • Dust collection not up to par
  • Stock blade not very good
  • Some people have reported sticky sliders, making it difficult to move sometimes

What feature set are you getting?

This DEWALT comes with a variety of options. Here is what you will get:

  • 7 stop system for making precise and repeatable cuts for bevels
  • Detent plate which has 11 positive stops
  • Crosscut stops which aid in vertical accuracy
  • Dual horizontal rails to help with sliding
  • The tail fence which helps with base and crown molds
  • Easy to assemble, for a miter saw

Should you buy it?

Truthfully, this is a great miter saw. However, we think there are better products out there. For this price, we think that looking at a few of the others in the price range or looking at some of the other options that cost a bit more is worth doing.

You are likely going to be using this for a long time, so we think spending a bit more on a product that does more is the best option. This is especially true for dust collection. This is one thing that we just didn’t like here. Will you be happy with the product? Most likely. Would you be happier with something that is better – without a doubt?

DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw Review

The DEWALT DWS780 is one of the more high-end miter saw models provided by DEWALT. It has a price tag this large for a reason – this thing is a beast. At 15 amps and 3800 RPM, there isn’t much you won’t be able to cut. The blade, at 12 inches, is huge and is more than versatile, and is easily portable despite its size.

What are a few of the best features?

The big plus for the DWS780 is precision accuracy. Even if you aren’t that accurate yourself, this machine should make up for it. It contains 10 different stops that are clearly marked to make your life easier. If these weren’t easy to use though, it wouldn’t be worth mentioning.

Of course, there are locking mechanisms in place to make sure you don’t make a mistake. This, along with the cross-cut alignment allows you to maneuver it like a pro. When you are using different angle settings, there won’t be any need to worry.

Of course, no product is worth the money if it doesn’t last. As with most DEWALT products, this thing can be taking a beating. With precision casting, durable guards, stainless steel detent plate, and fences there don’t much worry for you in this department.


  • If you like to abuse your tools, then you have no worries here. The design features built in make this Dewalt very durable
  • It is properly aligned as soon as you take it out of the box
  • Several safety features for the less experienced
  • The stops on angles make them much easier to cut
  • For those uninitiated with miter saws – the DEWALT DWS780 contains many options to make it easy to use
  • Cutline projection to help you see what you are doing


  • Some users have had issues with the saw’s sliding ability
  • The slide is also a little restrictive
  • General trimming looks great, but may not work the best for interior cuts

What are you going to be getting?

  • 15 Amp and 3800 RPM motor
  • XPS cross cut positioning system
  • Back fence system for more advanced cuts
  • 10 stop system with adjustable stainless system detent plate
  • The great dust collection system
  • Long, 3-year warranty

What is our verdict?

If you are looking for the best miter saw that requires a 12-inch blade, you can’t go wrong with this one. It is one of the more expensive models, but the overall ease of making cuts with it makes it worth the money.

While the slide tends to be an issue for some people, we think it is something that can be overlooked with the rest of the features. For people who don’t have much experience tuning one of these saws, the out of the box calibration is even better for you. We suggest giving the DWS780 a serious look to buy.

DEWALT DWS782 12-Inch Slide Compound Miter Saw Review

The DEWALT DWS782 provides you with a 12-inch blade, which is one of the larger models for a miter saw. It comes with 15 amps of current and a 3800 RPM motor. Without a doubt, this thing won’t have issues shaping your wood. It is also a dual bevel, so you are going to be able to make cuts at greater angles than you could with a single bevel miter saw.

Here are a few features that make it worth a look:

There may be some of you that have issues with slipping. With this DEWALT, you don’t need to worry about that. You will find 10 different adjustable stops which will allow you to lock it and get the job done. And with the dual bevel, you are going to be able to do it on both sides. You will be able to handle any angle you through at it.

For those people who don’t need angles right away, most people who just want a straight 90 degree or 45-degree cut have said that it does good out of the box for those.

The tail sliding fence allows for crown moldings up to 7 /12” and for base moldings up to 6 3/4”. Other customers have used other blades with the DWS782 and had no issues at all with compatibility. It does get a little jerky when you first start it up, however. It pays to start off slow so it stays stable at higher speeds. Once your there, everything should be good to go.


  • Dust Collection. Built-in dust collection mechanisms make clean-up a breeze.
  • Dual-Bevel. Dewalt makes a great double bevel. You can be certain you can hit all the angles you need for any complex cuts.
  • Portability. This thing is compact. The lightweight frame makes it easy to pack up and store wherever you want.
  • Once you get the fence set to square with the blade it stays there pretty well. The miter rotation is simple to change and is quite accurate for most all projects, including frames. The locks make it easy to stay in place.
  • You get a lot of power with this to shape your wood however you want with no slowdown in sight.
  • Getting things setup is quick and easy with the 10 positive stop options. It is simple to get up and running.


While it is portable, it is also pretty heavy. If you don’t have a lot of strength you may be one of the ones who have issues moving it around.

Unpacking DWS782 – Here is what you get:

  • 15 Amp and 3800 RPM Motor
  • Dust collection system
  • Supports base molding up to 6 3/4 ” and crown molding up to 7 1/2 ”.
  • 60 degree right and 70 degrees left angles
  • Adjustable with 10 positive stops
  • 3-year limited warranty and 1-year service contract

What is our verdict?

While pricey, the DEWALT DWS782 is worth the purchase. The adjustability of it makes it completely worth it. Every part of it is adjustable and it allows you to make some great cuts in some tough conditions. Even with all of the adjustments, most people are able to use it straight out of the box, so you may not even need to wait to get going with it. If you need to change it later, of course, you can do that. We give the DWS782 a great recommendation.

Dewalt DW716 15 Amp 12-Inch Double Bevel Miter Saw Review

Miter saws are an essential tool for carpentry work but not all types will fit your specific needs as a consumer. This review will cover up all the capabilities and disadvantages of the Dewalt DW716 Double Bevel Miter Saw giving you an idea of whether this saw is for you. Continue reading and learn why most people find this a saw worth giving a try.

Don’t worry about product reliability and build quality. This product is made under the brand name of DeWalt, a brand that has been making miter saws for quite some time and has made a name for themselves in the business. The brand specializes in hardware materials giving you the assurance that this product is a long-lasting piece of tool.

Why prefer the DeWalt DW716 double bevel miter saw

  • 15-amp motor – this saw packs a lot of strength is powered by a 15-amp motor. You can basically cut through any type of wood with the accuracy and smooth finishes.
  • Safety – even if you’re a person in the business for a long time, accidents are still inevitable. Since you are dealing with heavy objects and a sharp cutting blade rotating at 3,600 rpm, safety is the main priority for miter saws. You basically have a blade guard that is in sync with the arm of the saw. Once you place the blade down, the guards move up and protect your hand, pull the blade back up and the blade guards drop back to place.
  • Portability – blades, heavy metal components, and a motor are all cramped up on a miter saw making it usually heavy. The Dewalt DW716 Double Bevel Miter Saw is specially designed to maximize portability with an average weight of 44 pounds. It is not the lightest miter saw out there but it is still under a manageable weight for easy portability.
  • 12-inch blade – Keep in mind that the larger the blade, the higher the maximum cutting height capacity. The 12-inch blade allows you to cut a maximum height of 6 and a half inches with safety fences of 5and one-fourth inches in height.
  • Blade stops – since you are dealing with hardwood and a strong motor, it is going to be a problem to be in control while you maneuver your blade to get those tricky cuts. A small jiggle on the hand and you have yourself a jagged and inaccurate finish to your word work. The use of premade blade stops that lock the blade in common positions while you apply force prevents any unwanted movement giving you accurate and desired results. The saw mainly has 11 stops for miter cutting and 7 different bevel stop angles.

The only thing wrong with the DW716

Despite all the high-quality parts this saw is made from, there is one part that was left behind. The throat plate of the saw is made from cheap plastic which wears so fast after a few uses. Something you would not expect from an expensive machine made from DeWalt. Though this is easily fixed by a simple part replacement and doesn’t cost that much.

What’s on the package?

The Dewalt DW716 Double Bevel Miter Saw is a compact yet powerful miter saw surely to accomplish any carpentry needs and comes with a slashed down price. Along with the tool comes a long-term relationship with the company through their 3-year limited warranty guarantying non-stop service from unforeseen factory damages. It also comes with a year worth of service contract and a 90-day money-back guarantee to assure you that this tool meets up to its price.

Maximizing performance

The tool itself performs extraordinarily, but get the best out of it by setting it up properly. The standard procedure is the same as any other miter saw setups. Nail, screw or lock the miter saw on a compatible stand. Mount the piece of wood to be worked, lock the miter table, and adjust the fences and lock the desired bevel angle and you will sure to get clean cuts without much strain or effort.

To whom is this best suited?

This is designed to be a portable device but did not risk the blade size for maximum cutting sizes. The Dewalt DW716 Double Bevel Miter Saw is a recommended saw for on the field workers who carry around their own tools but maybe too much for people who only consider woodworking as a hobby.

What the people are saying

The Dewalt DW716 Double Bevel Miter Saw lives in a family of saw cutters and this one received a lot of hype in the industry lately and has been the top-selling miter saw at one time. People recommend this saw because of the accurate and smooth cuts that everybody is looking for, along with multiple safety standards and long-lasting high-quality components.


With the Dewalt DW716 Double Bevel Miter Saw, you are guaranteed to have the best miter saw in its price range. Safe, easy, and highly dependable in all situations. Its compact and lightweight design ensures to prevent body strains before the real work starts. All the locks and safety capabilities make it recommended for both beginners and professionals alike in the business

DEWALT DW713 10-Inch Compound Miter Saw Review

This review revolves around all the specialties and capabilities of the DW713 miter saw. Everything you need to know about it can be found here. Have a good read and find out for yourselves if this miter saw fits your needs and also learn why most people prefer it.

The DW713 is made by DeWalt, a famous company already specializing in the production of different hardware equipment. They are one of the leading brand names in the construction supplies industry which give you a thought of its reliability.

There is much to take note of this product. It features new innovations and add-on capabilities that may play a huge part in your role as the consumer. Depending on what you are looking for, this might be the best out there for you.

Why the DeWalt DW713 is preferred by most

  • 15-amp motor –with a strong motor, you are sure to get smooth cuts. May it be softwood or hard oak wood, you are surely going to get good cuts on your wood.
  • Detent plate –You are dealing with saws and wood which makes smooth and accurate turning a big plus for the saw. The detent plate of the DW713 features 11 stop points designed to hold lock your position when cutting in angles. The stop points keep you in place while you’re making your tricky cuts resulting in smooth finishes.
  • Safety fences –Just before you put those blades down on your cutting board, the safety fences simultaneously rise up giving protection as you cut along. This gives you a view of your other hand while you’re putting down your saw giving you time to realize whether your hand is on the way of the saw just before the fences pop up blinding your view.
  • Lock – with all that power on your motor, the wood you would be cutting is likely going to wiggle and result in jagged edges. Don’t fear because the DW713 has a strong miter lock for accurate miter table positioning.
  • Lightweight –Just weighing an average of 35 pounds with compact features, you can simply hand-carry this saw without risking backache or extensive strain just before doing the real work.

The only thing wrong with the DW713

Short safety fence – the shorter the safety fences the shorter the maximum vertical cut limit. Something not fit for heavy workers looking for an all-around machine. The saw basically just has a maximum vertical cutting limit of 6 inches. This is because of the goal to become a compact cutter. Preventing you from cutting tall stalks of wood.

What’s on the Package?

At a slashed down price you get a highly compact and lightweight cutter that still packs a lot of power. Running 5, 000 rpm at a no-load speed, this is as fast as it gets compared to other models like the DW715, DWS780, and DW716.

The price comes with a long term relationship with the company with a 3-year limited warranty assuring you of 3 years of non-stop service. Along with the standard warranty comes a year of the free service contract and a 90-day money-back guarantee. All the more reasons to be self-assured of what you are going to buy.

Setting it up

The DW713 works best under certain conditions. Get the best out of your machine by setting it up properly. Just like any other miter saw, screw or nail it on a usual miter stand. Screwing is more preferred since this is made as a portable and moveable saw.

Place the wood to be cut on the miter table and adjust the safety fences. Locking the miter table and safety fences will guarantee the best results. The locks keep the blade in its path no matter how much force is being applied guarantying quality cut.

To whom is this designed for?

The main goal of its design is to achieve portability which is more targeted at the enthusiast rather than the heavy workers. This is also just meant for on the field workers who need portable machines to cut small wood.

The DW713 is not designed for an overall use device as its cutting limits are limited.

The DW713 has received a lot of hype because of its features and functionality. This is a great product and a lot of people have found it a great substitute and replacement in most cases. This is a great cutter for starters and people are going for it.

Why get one?

Buying the DW713 will save you a lot of future expenses. The well-built frame, neck, and body will last over a lifetime being made from stainless and quality hardened steel. Parts are also easily accessible due to their easy compatibility with their other predecessors.

The design prevents any unwanted spraying of sawdust, allows a free moving and adjustable blade, and many more to give you the best quality cuts. The DW713 is guaranteed to help maximize get those smooth cuts with ease. No more back pains, arm aches, and over the top muscle strains with the DW713.

DEWALT DW715 15-Amp 12-Inch Compound Miter Saw Review

The Dewalt DW715 is a 12-inch compound miter saw featuring 15 amp power at 4000 RPM no-load speed, which offers more extended power and durability. It incorporates an adjustable stainless steel miter detent plate with 11 positive stops for the most popular miter cuts. There’s also a high-quality manual override for custom miter cuts.

You Don’t Have to Worry Anymore!

You don’t have to worry about slipping to any of the built-in positive stops. This feature makes it possible to replicate miter angles with precision time and time again. The machine-based fence design is a unique innovation that delivers long term fence straightness by providing the necessary support.

It has a tail sliding fence for crown molding up to 5 -¼ inch nested and base molding up to 6-1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts. The tall sliding fence design makes it ideal for working with crown and base moldings. It has a convenient cam-lock miter handle which makes adjusting to any desired angle fast and accurate. This miter saw allows for manual override without the saw accidentally slipping to any of the pre-set positive stops.

Versatile Bevel Cuts

  • 4 hardened steel bevel stops at 0, 33.9, 45, and 48 degrees
  • 45-degree bevel cuts through dimensional lumber up to 2 x 8 inches
  • 0 degrees and 48 degrees to the left
  • 0 degrees and 3 degrees to the right
  • Can cross cut 2 x 10s


  • Portability. The built-in carry handle makes this saw completely portable:
  • Pricing. Dewalt makes a double bevel miter saw, but it over 100 USD more.
  • Durability. There are countless customer reviews supporting this.
  • Once you get the fence set to square with the blade it stays there pretty well. The miter rotation is easy to move and is quite accurate for most all projects, including frames.
  • The saw has plenty of power to make cuts into various types of woods with no troubles or slowdowns.
  • You can use it mostly for rough cuts (close enough), which is the typical application of miter saws. The blade brake is extremely effective, you don’t have to worry about the blade continues to spin once the saw has been stopped.
  • Setting up miters and bevels are super easy with the provided gauges.


This is only a single bevel saw. Dewalt also makes a double bevel saw but it is over 100 USD more. In addition, the double bevel model has less power, running at only 3600 RPM This miter saw operates at a relatively loud level.

Unpacking DW715 – What is Included in the Box:

  • Miter Saw
  • Carbide Blade
  • Dust Bag
  • Blade Wrench
  • 3-year Limited Warranty
  • 1 Year Service
  • 90 Day Money Back Guarantee

What is our verdict?

The DEWALT DW715 15-Amp12-Inch Compound Miter Saw is an impressive saw, head, and shoulders above the competition. It’s received nearly 5 out of 5 stars from several customer rating and review sites.

The key features are its durability and precision. The adjustable stainless steel miter detent plate with 11 positive stops at the most common settings is a strong selling point as well as the manual override to work with custom angles. Portability is an added bonus due to its perfectly placed, rock-solid handle. Click on the link below to purchase this product.

Types of Miter Saws

Basic Miter Saws

Basic miter saws can be used to make miter cuts for things such as picture frames, simple molding, carpentry finish work, and other projects requiring an angled horizontal cut. They also make great, square crosscuts. These saws do not cut bevels or adjust for wide lumber, so they are most appropriate for most basic applications.

These saws are often lightweight and reasonably priced, they are a good entry-level carpenters choice in the tool, this is especially true if you are replacing a handsaw or miter box.

Compound miter saws

Compound miter saws make straight cuts as well as miter and beveled cuts. These saws blades can be tilted to make beveled cuts and come in single or dual modes. Single compound mode units tilt-only one direction usually within a 45-degrees. To make cuts in the opposite direction, the saw user must reposition or move the workpiece.

Models with dual-compound tilt in either direction so the workpiece does not need to be flipped around. They are a great choice for frequent bevel work such as crown molding which takes a bevel angle at both ends. A compound bevel saves the time of moving and re-positioning the piece in order to make the second cut. These saws are also very handy for working with large pieces that are cumbersome to move.

Again, while single compound saws are often lighter and definitely less expensive than dual-compound saws, a compound miter saw adds the convenience that can speed up projects and improve accuracy. If doing more than the occasional bevel work, it might be wise to consider a dual model tool.

Sliding compound miter saws

Sliding compound miter saws have the same features as a compound saw but with the addition of a sliding arm for cutting wider lumber. The arm moves the motor and the blade assembly across a larger cutting area than the other model’s saws can accommodate.

When making crosscuts in wide lumber, the user can push or pull the blade through so that it cuts in one pass. Sliding compound miter saws come in single and dual bevels and are by far the most versatile type of miter saw as well as pricey. But you may want to consider one if applications involve different widths of material.

How To Choose The Best Miter Saw?

People have special needs and for us carpenters, one of the greatest hindrances that we experience in everyday work is cutting wood. Sounds easy to do but it is actually hard to accomplish if you have certain specifications to meet like cutting wood in angles, making the perfect crowns, and don’t forget about cutting curves. All of these are nearly impossible to accomplish if you only have a manual manpower saw.

So, how do you make this task achievable as well as easy? Simple, you get a miter saw. It is powerful, accurate, and long-lasting. You are not limited to the possibilities you can do especially that there are a lot of miter saws in the market.

There is no uniform design to follow which gave companies the freedom to design whatever they like but this made it hard for us users. Choosing the best miter saw is tricky though certain guidelines to follow will make your purchase worth every penny.

Look at the Brand

Don’t judge a book by its cover as they say but if a company has made a good reputation with its products then the chances of being dismayed are smaller. There are certain brands to take note of since they have made a name for themselves which gives these products the priority when left choosing with two equally designed products but of different brands.


If you are in a store that has a portion for Makita products only, you might want to go with that aisle directly. The brand has been in the motor tools business for nearly a century. This vast amount of experience has taught them a thing or two about what the customers want and what their devices need.

Their process of building starts with choosing only the best grade steel as well as using only 97% pure magnetic copper for their motors. They also test their tools under extreme conditions that cannot be simulated under normal work conditions which made these products tough and highly tolerant.

If that’s not enough, you wouldn’t even have to worry about defective products since inspections are tight. They perform a 19 point inspection for the motor alone as well as running it in a maximum of 3 minutes.


Quality and perfection are what is being described with DeWalt. Overall, it only just comes below the ranking of Makita and that is because they impose nearly the same level of the strict building. Though if you are on a budget and in the pursuit of a cheap miter saw, might as well stay away from this brand.

Despite its high-quality tools, priced between mid-levels to expensive, the cheaper ones are actually no good. Not all are bad, they just have their own ups and downs with the downs dominating.


Currently, Hitachi is being described as a fading brand in the tools business but that is not an accurate description. Compared to other brands like the Ryobi, Hitachi is still a preferred choice.

They don’t put that much planning and innovation into their design so don’t expect some well-packaged saws as well as some logical and ergonomic features. In terms of quality, they still stand a chance to compete with Makita.

Common Features You should find


No miter is a saw without a blade which is actually quite obvious but what is actually not obvious is the size of the blade. A lot of people new to carpentry work are always bothered about what diameter of blade they should use and in all honesty, it is actually a very tough choice since bigger is not always better.

Choices in the market range from 12, 10 to 8 inches. Larger ones have higher cutting capacity but are harder to control and work with if you have very small wood to cut. Smaller ones on the other hand are impossible to use with thicker wood.

Movable parts

Miter saws have a lot of moving parts which enables them to be flexible in any situation. Among the parts that need to be moveable are the table and the neck. The neck should not only be limited to going down but also to go sideways, a feature essential for cutting crowns. The table should also turn for easy angle cuts for the baseboard and other flat boards.


The key to a perfectly cut wood is a perfectly strong motor. Don’t just look at the motor and be deceived with size but instead be more technical. Nothing much to remember, the motor should at least be 15 amps and be able to achieve 5, 000 rpm without a load. If it satisfies this criterion, you have a sufficiently good motor that can cut through any type of wood.

Additional features

As I’ve said, there are many variations, and companies tend to put a lot of features to make it more functional. You might find the following features in some selected saws.

  • Guide laser – for a preview where your blade is going to cut.
  • Overhead light – convenience to cut in the dark.
  • Synchronized blade cover – for active blade protection.
  • Dust tube – for a mess-free working environment.


It is normal to experience a dilemma when buying your miter saw. Even the experienced laborers still have a problem choosing theirs. Just remember that the blade size must fit the type of wood you are cutting and that the motor should suffice the standards mentioned. For additional work flexibility, choose a saw that has a moveable neck and a turning table. If you suffice the three but caught up between two saws, let the brand names be the tiebreaker.